CONTACT US
Nylon Pleated Filter Cartridge
- Commodity name： Nylon Pleated Filter Cartridge
Description
Product Introduction
Nylon Pleated Filter Cartridge is made by natural hydrophilic nylon membrane and PP components through advanced hot melt sealing technology under Class-100 environment . The filter element meets the technical requirements of GB/T34244-2017 of the People's Republic of China and without any adhesives or surfactants.
Characteristics and features
-
Excellent high-tem resistance and alkali resistance.
-
All the compositions reach up to the requirement of the biological testing characteristics of USP Class 6 plastic products at 121℃ and the food contact materials listed in the relevant regulations of Chapter 21 of the Federal Regulations of the United States (CFR). They also conform to the requirements of China's "Standard for Hygienic Safety Evalution of Equipment and Protective Materials in Drinking Water" (2001) for drinking water transport and distribution equipment.
-
The sampling of filter element successfully passed the bacterial challenge test required by regulations, LRV≥7.Integrity can be maintained after repeated high-pressure disinfection.
-
Each filter element should pass the integrity test before leaving the factory. The limitations of integrity testing were correlated with the results of bacterial challenge experiments.
-
It is manufactured under ISO 9001 and ISO 14001 systems and Class 100 environment.
-
Natural hydrophilicity, easy to wet and fast to test integrity.
-
High tensile strength, suitable for applications with high impurity content and high viscosity.
-
Production and usage are traceable.
Filter element component material
| Filter Media | Natural Hydrophilic Nylon Filter Membrane |
| Support/Flow Guide Layer | Polypropylene |
| Mandrel/Outer Cover/End Cap/Point | Polypropylene |
| Sealing Joint/Locking Fins | 222, 226 Polypropylene, with built-in stainless steel reinforcement option |
| Sealing Ring | Silicone Rubber, EPDM Rubber, Fluororubber, etc. |
| Sealing Technology | Adhesive-Free Heat Seal |
Technical Specifications and Usage Conditions
Filter Cartridge Size
Diameter: 2.75" (69 mm)
Length: Specifications: 2.5", 5", 10", 20", 30", and 40".
Filtration Accuracy
0.1μm, 0.2μm, 0.45μm, 0.65μm, 1μm
Filtration Area
The filtration area of a single 10" filter cartridge is approximately 0.65m².
Filter Cartridge Leachate (20℃)
For filter cartridges that have not undergone pre-rinsing, after soaking in water for 24 hours, the leachate content is less than 30mg/10" long filter cartridge.
Integrity Test Data: Minimum Bubble Point Value
0.22μm: > 0.25MPa, Water 0.45μm: > 0.18MPa, Water Maximum Operating Pressure Difference and Temperature Maximum Operating Temperature: 60℃/0.2MPa; 25℃ ≥ 0.4MPa Typical Flow Rate (Water, 20℃) 0.22μm: 8.3lpm/0.02MPa/10⁻⁶ 0.45μm: 10lpm/0.02MPa/10⁻⁶ Flow Characteristics
Order Model
Typical Applications
● Terminal filtration for ultrapure water
● Sterilization filtration for food, beverages, and alcoholic beverages
● Pharmaceutical and healthcare industry: filtration of pharmaceutical solutions, etc.
● Pre-filtration for more precise filtration
Keyword:
Nylon Pleated Filter Cartridge
Get A Quote
Note: Please leave your email address, our professionals will contact you as soon as possible!
WhatsApp / Wechat
Address
17th Floor, Building 1, Jingkai Taihu Information Technology Industrial Park, No. 16 Gaoyuan Road, Taihu Street, Binhu District, Wuxi City, Jiangsu Province, China